2-Port 25 GbE (50GB Total Bandwidth) SFP28 Card

2-Port 25 GbE (50GB Total Bandwidth) SFP28 Card

$653.00

10 GIGABIT ETHERNET CARD QUAD PORT FIBER SFP+ NETWORK INTERFACE CARD INTEL® X710BM2 BASED

High Performance, Quad Port 10GbE Ethernet Adapter, Compatible With the Netgate 8300, 1537, and 1541.

This 10 Gigabit Ethernet Quad Port SFP+ Computing PCI Express Network Interface Card offers simple integration into any PCI Express X8 slot to interface with 10Gigabit networks. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications. Based on the Intel X710 Ethernet controller, the card has a fully integrated Gigabit Ethernet Media Access Control (MAC) and SFI Interface.

In addition to managing MAC and PHY Ethernet layer functions, the controller manages PCI Express packet traffic across its transaction, link, and physical/logical layers. Using hardware acceleration, the controller offloads tasks from the host, such as TCP/UDP/IP checksum calculations and TCP segmentation.

This 10 Gigabit Ethernet PCI-Express Network Interface Card is the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications, and environments within high-performance servers.

KEY FEATURES:

  • Supports Direct Attached Copper cable
  • SFP+ approved transceivers
  • RoHS compliant

Performance Features*:

  • Support for jumbo frame up to 9.5KB
  • Flow control support
  • Priority Flow Control (draft IEEE 802.1Qbb)
  • Enhanced Transmission Selection (draft IEEE802.1az)
  • Statistics management and RMON
  • 802.1q VLAN support
  • DCB/DCB-X support
  • Message Signal interrupts (MSI-X)
  • Storage – Enabling competitive performance with native OS intelligent offload solutions, including NAS, iSCSI and FCoE

Host Interface:

  • PCI Express GEN3 X8 lanes
  • Support PCI Express Base Specification 3.0 (8GT/sec)

LAN and Virtualization Features*:

  • Network Virtualization offloads for VXLAN and NVGRE
  • Unified Networking Providing a single wire for LAN and storage: NAS (SMB, NFS) and SAN (iSCSI, FCoE)
  • Virtual Bridging Support – VEPA/802.1Qbg, BPE/802.1Qbh
  • Physical Functions – Up to 8 per port, up to 16 per device
  • Support for 128 Virtual Device Queues (VMDq) per port
  • Hardware Queue Pairs – Up to 1.5K (non-RDMA); up to 256K (RDMA)
  • Virtualization – Alleviating hypervisor I/O bottlenecks by providing flow separation for Virtual Machines (VMs)

TCP/IP/L2 features*:

  • Receive Side Scaling (RSS)
  • Large Send Offload (LSO)
  • TCP/UDP/IP/SCTP Checksum Offload
  • IPV4, IPV6

SPECIFICATION:

SFP+ 10GIGABIT ETHERNET TECHNICAL SPECIFICATIONS ADAPTERS:

SFP+ (Small Form Factor Pluggable) supports:SFI interfaces supports 10GBase-R PCS and 10 Gigabit PMA in order to connect with SFP+ to 10GBase-SR / / 1000Base-SX / 10GBase-LR and SFP+ Direct Attach
10GBase-SR SFP+:
IEEE Standard / Network topology:		Fiber 10Gigabit Ethernet, 10GBASE-SR (850nM LAN PHY)
10GBase-SR SFP+:
Data Transfer Rate:		10.3125GBd
10GBase-SR SFP+:
Cables and Operating distance Up to:		62.5um, 160MHz/Km 26m
62.5um, (OM1)200MHz/Km 33m
50um, 400MHz/Km 66m
50um, (OM2)500 MHz/Km 82m
50um, (OM3)2000MHz/Km 300m
10GBase-LR SFP+:
IEEE Standard / Network topology:		Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY)
10GBase-LR SFP+:
Data Transfer Rate:		10.3125GBd
10GBase-LR SFP+:
Cables and Operating distance Up to:		Single-Mode: 10000m at 9um
10GSFP+Cu :
IEEE Standard / Network topology:		Copper 10Gigabit Ethernet, 10GSFP+Cu (Direct Attach)
1000Base-SX / 10GBase-SR SFP+:
IEEE Standard / Network topology:		Fiber Gigabit Ethernet, 1000Base-SX (850nM LAN PHY)
Fiber 10Gigabit Ethernet, 10GBASE-SR (850nM LAN PHY)
1000Base-SX / 10GBase-SR SFP+:
Data Transfer Rate:		10.3125GBd / 1.25GBd
10000Base-SX / 10GBase-SR SFP+:
Cables and Operating distance Up to:		10000Base-SX:
62.5um, 160MHz/Km 220m
62.5um, (OM1)200MHz/Km 275m
50um, 400MHz/Km 500m
50um, (OM2)500 MHz/Km 550m
50um, (OM3)2000MHz/Km >550m
10GBase-SR:
62.5um, 160MHz/Km 26m
62.5um, (OM1)200MHz/Km 33m
50um, 400MHz/Km 66m
50um, (OM2)500 MHz/Km 82m
50um, (OM3)2000MHz/Km 300m
1000Base-LX / 10GBase-LR SFP+:
IEEE Standard / Network topology:		Fiber Gigabit Ethernet, 1000Base-LX (1310nM LAN PHY)
Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY)
1000Base-LX / 10GBase-LR SFP+:
Data Transfer Rate:		10.3125GBd / 1.25GBd
1000Base-LX / 10GBase-LR SFP+:
Cables and Operating distance Up to:		10000Base-LX:
Single-Mode: 5000m at 9um
10GBase-LR:
Single-Mode: 10000m at 9um
1000Base-T SFP:
IEEE Standard / Network topology:
1000BASE-T Ethernet

OPERATING SYSTEMS SUPPORT

Operating system support:Windows
Linux
FreeBSD
VMware

GENERAL TECHNICAL SPECIFICATIONS

Interface Standard:PCI-Express Base Specification Revision 3.0 ( 8 GTs)
Board Size:Low profile short add-in card: 145.542mm X 64.389mm (5.730”X 2.535”)
PCI Express Card Type:X8 Lane
On Board Connector Voltage:+12V +/-8%
PCI Connector:X8 Lane
Controllers:Intel X710BM2
Holder:Metal Bracket
Operating Temperature:0°C – 45°C (32°F – 113°F)
Storage:-40°C–65°C (-40°F–149°F)
EMC Certifications:FCC 47CFR Part 15:2013, Subpart B Class B
Conducted emissions
Radiated emissions
EN 55022: 2010, Class B
Conducted disturbance at mains terminals
Conducted disturbance at telecommunication port
Radiated disturbance
EN 61000-3-2: 2006+A1(09)+A2(09)
Harmonic current emissions
EN 61000-3-3: 2008
Voltage fluctuations and flicker
EN 55024: 2010
Immunity to electrostatic discharge (ESD)
Radiated immunity to radio frequency electromagnetic field
Conducted immunity to electrical fast transients / bursts (EFT/ B)
Conducted immunity to voltage surges
Conducted immunity to disturbances induced by radio frequency field
Conducted immunity to voltage dips and short interruptions

LEDS

LEDs:(2) LEDs per port
Link Speed:
Turns on Green 10G Link.
Turn on Yellow on 1G Link
Link/Act :
Turns on link (Green),
Blinks on activity (Green)
LEDs location:LEDs are located on the PCB, visible via holes in the metal bracket
Connectors:(4) SFP+ cage

ADDITIONAL INFORMATION:

  • If you are utilizing this card in the Netgate 1537 or 1541, you MUST add an additional 40mm case fan with at least 200 lf/m.
  • PLEASE CONTACT US IF YOU ARE ADDING THIS CARD TO THE Netgate 1541 OR 1537 SYSTEM FOR ADDITIONAL REQUIRED COMPONENTS.
  • * FEATURES AND THROUGHPUT ARE SUBJECT TO HARDWARE AND OPERATING SYSTEM SUPPORT.

WARRANTY AND SUPPORT INFORMATION:

  • No returns
  • 1 year manufacturers warranty
  • All Specifications subject to change without notice.
Category:

25 GIGABIT ETHERNET LOW PROFILE CARD DUAL-PORT FIBER & DAC SFP28 NETWORK INTERFACE CARD INTEL® E810 BASED

HIGH-PERFORMANCE, DUAL-PORT SFP28 25/10/1 GIGABIT ETHERNET PCI EXPRESS SERVER ADAPTER

 

This 25 Gigabit Ethernet Dual-Port SFP28 Computing PCI Express Network Interface Card offers simple integration into any PCI Express X16 slot to interface with 25 Gigabit networks. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications. Based on the Intel E810 XXVAM2 Ethernet controller, the card has a fully integrated 25 Gigabit Ethernet Media Access Control (MAC) and SFI Interface.

In addition to managing MAC and PHY Ethernet layer functions, the controller manages PCI Express packet traffic across its transaction, link, and physical/logical layers. The controller offloads tasks from the host using hardware acceleration, such as TCP/UDP/IP checksum calculations and TCP segmentation.

This 25 Gigabit Ethernet PCI-Express Network Interface Card is the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications, and environments within high-performance servers.

KEY FEATURES:

  • 2x SFP28 ports
  • 1x Intel E810 network controllers
  • 50 Gbps total BW
  • Supports Direct Attached Copper cable
  • Supports SFP28-approved 25G and 10G transceivers
  • Low Profile
  • Based on Intel E810-CAM1
  • RoHS compliant

Host Interface:

  • PCI Express GEN4 x8 lanes
  • Support PCI Express Base Specification Revision 4.0, 16GT/s, 8GT/s, 5GT/s, or 2.5GT/s

LAN and Virtualization Features*:

  • Support for Network Virtualization Offloads including SR-IOV, Geneve, VXLAN and NVGRE
  • Unified Networking Providing a single wire for LAN and storage: NAS (SMB, NFS) and SAN (iSCSI, FCoE)
  • Remote SAN boot with data path intelligent offload
  • VEB (Virtual Ethernet Bridge) & Edge Virtual Bridging / 802.1Qbg
  • VMDq for VMware Netqueue and Microsoft DVMQ
  • SR-IOV (Single Root I/O Virtualization): up to 256 Virtual Functions
  • iSCSI and PXE boot (legacy and UEFI)
  • Support for standard and custom network headers
  • Partially Programmable Pipeline and Advanced Traffic Steering
  • Intel® Ethernet Flow Director – 8000 On-Die perfect match filters
  • 1536 queues/Physical Function (PF), >64 RSS/PF and 256 VMDq/PF
  • Data Center Bridging (DCB) up to 8 traffic classes

SPECIFICATION:

SFP28 25 GIGABIT ETHERNET ADAPTER TECHNICAL SPECIFICATIONS:

SFP28 (Small Form Factor Pluggable) supports:SFI interfaces support 25GBase-R PCS and 25 Gigabit PMA to connect with SFP28 to 25GBase-SR
25GBase-SR SFP28:
IEEE Standard / Network topology:
Fiber 25 Gigabit Ethernet, 25GBASE-SR (850nM LAN PHY)
25GBase-SR SFP28:
Data Transfer Rate :
25.78125 Gbps
25GBase-LR SFP28:
IEEE Standard / Network topology:
Fiber 25 Gigabit Ethernet, 25GBASE-LR (1310nM LAN PHY)
25GBase-LR SFP28:
Data Transfer Rate:
25.78125 Gbps
25GBase-LR SFP28:
Cables and Operating distance Up to:
Single-Mode: 10000m at 9um

OPERATING SYSTEMS SUPPORT

Operating system support:Windows
Linux
FreeBSD
VMware

GENERAL TECHNICAL SPECIFICATIONS

Interface Standard:PCI-Express Base Specification Revision 4.0 (16 GTs)
Connectors:(2) SFP28 / zSFP+ Cage
Board Size:Low profile short add-in card: 145.542mm X 64.389mm (5.730”X 2.535”)
Form Factor:LPHL: Low-Profile, Half-Length
PCI Express Card Type:X8 Lane
On Board Connector Voltage:+12V +/-8%
PCI Connector:Gold Finger: X16 Lane
Controllers:(1) Intel E810-XXVAM2
Holder:Metal Bracket
Operating Temperature:0°C – 45°C (32°F – 113°F)
Storage:-40°C–65°C (-40°F–149°F)
Power Consumption:9.8W
Regulatory Certifications:CE, FCC Class B, ROHS

LEDs

LEDs: 

Two LEDs per port to indicate link status and speed.

Physical Link & Link Speed LED:
Green solid – physical link on with 25G Speed
Yellow solid – physical link on with 10G Speed
Off – physical link off

Logic Link & Activity LED:
Green solid – logic link up, no activity
Green blinking – logic link up, activity
Off – logic link off

 

LEDs location:LEDs are on the PCB, visible via light guides through the metal bracket

ADDITIONAL INFORMATION:

  • * FEATURES AND THROUGHPUT ARE SUBJECT TO HARDWARE AND OPERATING SYSTEM SUPPORT.

WARRANTY AND SUPPORT INFORMATION:

  • No returns
  • One year manufacturer’s warranty
  • All specifications are subject to change without notice.

Related products

Shopping Cart